Automatic Bottle Blowing Machine / Blow Molding System For Juice
1, Machine structure: Preform heating-blowing in one machine
2, Can be connected to production line
3, Automation: TOTALLY automatic
4, Bottle output: 4 pcs for one mould
5, Capacity: 4000BPH
6, Bottle type: PET bottles for filling juice and tea (hot filling)
7, Auxiliary machine needed: YES
Bottle blow molding system is used to blow plastic bottles in PET
and PP. These bottles can be used to fill mineral water, juice,
tea, carbonated water, and chemical liquid etc. So according to
client's filling material, we can help to sculpt the bottle shapes
before making the bottle moulds.
Applications and features:
- Widely used in food, beverage, dairy, cosmetic, medical, chemical
industrial and etc;
- PLC control, electric parts are well-known brand;
- Develop different bottles for explore more market;
- High adjusting performance to enable preheat the preforms
perfectly by adjust the voltage control area in the PLC, which
could adjust the temperature of the infrared lights in the
pre-heater, and keep the proper temperature and humidity
- High safeties with security automatic-locking device in each
mechanical action, which will make the production into a perfect
safe environment, in case of the breakdown in certain procedure
- Easy operation and maintenance;
- Compact structure for the preform heating, blowing, and bottle
forming are realized in one machine;
- All the movements of bottle blowing machine are driven by the air
cylinder, no need the hydraulic oil and even no pollution.
- Auxiliary machines are needed during blowing including LP (Low
pressure) air compressor, HP (High pressure) air compressor, air
dryer, air filters, air tank, and mould chiller.
Connection diagram & electric parts:
|Infrared thermometer||America raytek|
|Note||All of the electrical components adopts CE,UL,CCC approved
international advanced high-tech product.|
|Productivity||Depend on bottle design||3200-4000PCS/H|
|Product type||Body diameter||20mm-100mm|
|Main machine power||Electrical source power||380v 3Phase /220v 3Phase 50/60HZ|
|Really use power||14kw|
|Air source||LP air compressor||1.6m3/min 1.0MPa 1set (15KW)|
|HP air compressor||1.0m3/min 3.0MPa 2sets (each set 11KW)|
|Air dryer||2.0m3/min 3.0MPa 1set|
|Cooling water||Cooling water||15L/min|
|Auxiliary equipment(preform unscrambler)||L*W*H||2000*950*2480mm|
- Stable performance with advanced PLC.
- Automatic preform conveyer to save human cost.
- Introduce the FESTO air cylinder to avoid contamination and
- Strong clamping force with high pressure and double crank links
to lock the mould.
- Two ways of operating: automatic and manual.
- Low cost,high efficiency,easy operation and maintenance etc,
profited from the fully automatic technological process.
- Easy for you to install,test and start up.
please kindly click the play button to watch the video